Below-the-Hook Lifting Devices
C-Hooks
C-hooks are most often used to lift and move loads such as coiled sheet steel, coiled cable, paper rolls, steel culverts or any other product wrapped around a spool. The ram design for our c-hooks is a curved surface to prevent damage to the coil. Each c-hook is individually balanced to hang level when empty or full. Adequate space is provided in the throat of the c-hook to accommodate the largest coil for your application and sufficient clearance.
The crane operator controls the lifting process from the controls ideally from a safe distance, inserting the ram into the coil. For low headroom requirements, the design can be adjusted in thickness reducing the height of the structural members.
Highlighted Features
5:1 Safety Factor
Each c-hook is designed with a 5:1 safety factor and is certified upon completion
100 Ton Capacity
We offer c-hooks up to 100 tons (200,000 lbs) capacity, with or without parking stands
Unrivaled Durability
Cut from high strength steel plate for trusted durability
Detailed Specs
- Capacity of up to 100 tons (200,000 lbs), with or without parking stands
- A counterbalance weight ensures that the hook hangs level while unloaded
- Designed with high strength tensile steel plate
- 5:1 safety factor and is certified upon completion
- Equipped with digital weighing systems
- Remote control features
- Can withstand high temperatures
- Supplied with storage stands
- Motorized rotation
- Custom-engineering to meet the client’s specific requirements for load configuration, weight, lifting area and headroom
- Designs available to accommodate narrow coils
- Telescopic, horizontal and vertical lifters available, depending on your applications
| Capacity (Tons) | Model | Max Coil Width (IN) | Throat Height (IN) | Approx. Weight |
| 3 | CF-CH-6-30 | 30 | 24 | 339 |
| 3 | CF-CH-6-36 | 36 | 24 | 363 |
| 3 | CF-CH-6-48 | 48 | 24 | 501 |
| 5 | CF-CH-10-24 | 24 | 24 | 352 |
| 5 | CF-CH-10-30 | 30 | 24 | 414 |
| 5 | CF-CH-10-36 | 36 | 24 | 525 |
| 5 | CF-CH-10-48 | 48 | 24 | 789 |
| 5 | CF-CH-10-54 | 54 | 24 | 900 |
| 5 | CF-CH-10-60 | 60 | 24 | 950 |
| 7 1/2 | CF-CH-15-36 | 36 | 24 | 757 |
| 7 1/2 | CF-CH-15-48 | 48 | 24 | 1063 |
| 7 1/2 | CF-CH-15-54 | 54 | 24 | 1223 |
| 7 1/2 | CF-CH-15-60 | 60 | 24 | 1362 |
| 10 | CF-CH-20-36 | 36 | 24 | 884 |
| 10 | CF-CH-20-48 | 48 | 24 | 1234 |
| 10 | CF-CH-20-54 | 54 | 24 | 1388 |
| 10 | CF-CH-20-60 | 60 | 30 | 1552 |
| 15 | CF-CH-30-36 | 48 | 30 | 1602 |
| 15 | CF-CH-30-48 | 48 | 30 | 1602 |
| 15 | CF-CH-30-54 | 54 | 30 | 2091 |
| 15 | CF-CH-30-60 | 60 | 33 | 2248 |
| 15 | CF-CH-30-72 | 72 | 33 | 2920 |
| 20 | CF-CH-40-48 | 48 | 34 | 2413 |
| 20 | CF-CH-40-54 | 54 | 34 | 2646 |
| 20 | CF-CH-40-60 | 60 | 32 | 2823 |
| 20 | CF-CH-40-72 | 72 | 30 | 3641 |
| 30 | CF-CH-60-60 | 60 | 38 | 4394 |
| 30 | CF-CH-60-72 | 72 | 34 | 5694 |
| 30 | CF-CH-60-84 | 84 | 34 | 6702 |
Carney Fabricating also offers Coil Grabs for applications where only the top end of a coil is accessible
By firmly gripping the coil’s rim between the inner and outer diameters, coil grabs eliminate the need to re-position coils before moving them. Carney Fabricating is proud to offer custom designs and options to ensure that your coil grab suits your purposes perfectly.
COIL GRAB FEATURES
- Uses a heavy-duty worm gear reducer
- Drive protection with slip clutch
- Designed with replaceable wear plates and hinged covers
- Can be designed with a second set of jaws for a stronger grip and more even distribution of force
